Transition Networks 33423.A - Manual (Page 2)

IONPS-A, AC Power Module
2 Tech Support: 1-800-260-1312 – International: 00-1-952-941-7600 – (24 hours)
Table of contents
Cautions and Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Cautions and warnings in this manual . . . . . . . . . . . . . . . . . . . . . . . . .3
Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Power Module component identification . . . . . . . . . . . . . . . . . . . . . . .4
Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Power Module redundancy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Installing an optional Power Module into the ION chassis . . . . . . . . .6
Connecting external power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Replacing the Power Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Replacing the fuse . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Technical Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Contact Us . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Compliance Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
[email protected] – Click the “Transition Now” link for a live Web chat. 3
Cautions and Warnings
Definitions
Cautions indicate potential damage to equipment.
Warnings indicate a potential hazard or injury to people.
Cautions and warnings in this manual
Cautions and warnings are explained here and placed throughout this manual where
appropriate.
CAUTION: While installing or servicing the Power Module, wear a grounding
device and observe all electrostatic discharge precautions. Failure to observe this
caution could result in damage or failure of the Power Module.
WARNING: Do not connect the Power Module to an external power source before
installing it into the chassis. Failure to observe this warning could result in an
electrical shock, even death.
WARNING: A readily accessible, suitable National Electrical Code (NEC) or
local electrical code approved disconnect device and branch-circuit protector must
be part of the building's installed wiring to accommodate permanently connected
equipment. Failure to observe this warning could result in an electric shock, even
death.
WARNING: Turn the Power Module and external power source OFF and ensure
that the Power Module is disconnected from the external power source before
performing any maintenance. Failure to observe this warning could result in an
electrical shock, even death.