Topcom LUCCA Answering Machine - Manual (Page 26)

47
Lucca
46
Lucca
CHANGING OGM BY REMOTE CONTROL
1. Dial your telephone number.
2. After a few rings your machine will answer your call and emit the OGM. Press
# to stop OGM playback.
3. Enter your security code.
4. As soon as you hear the waiting signal, press “7”. You will hear: “Record
announcement”/“Bitte nehmen Sie den Ansagetext auf”.
5. After the beep tone, say your new OGM.
6. When you have finished your new OGM, press “7” again.
7. The machine will play back your new OGM automatically for checking.
8. Press “3” or hang up if your new OGM is OK.
DISPLAY
The display keeps you informed about the condition of your answering machine.
The following announcements can occur:
Condition of your answering machine Display
Answering mode without possibility
to leave a message
AO
Answering mode off —
Memory full Fu
Battery almost empty/no battery Lo
OGM/memo message registering,
counter starts from
0
Answering calls/remote control on (ein)
Erase waiting time, count down from 8 to 0
Pause waiting time, count down from 10 to 0
If the answering machine is in more than one condition at the same time, the
corresponding indications will appear subsequently.
MEMORY FULL
If the memory is full, “Fu” appears on the display. If a second OGM is registered
the answering machine automatically switches to “Answering mode without pos-
sibility to leave a message”.
If no second OGM is registered the answering machine will only answer after 10
rings. You can command your answering machine by remote control and erase
messages.
Only if you have emptied the memory by erasing messages, your answering
machine will switch back to “Answering mode with possibility to leave a mes-
sage”.
BATTERY
In case of a power failure, the answering machine is inoperative. The battery
saves the registered messages and settings. After the power failure has been
restored, your answering machine will operate as before again.
The battery can only save the registered messages and settings for a couple of
hours. If power failure lasts longer, these data will be lost and afterwards the
answering machine will switch to “Answering mode with possibility to leave a
message” with default OGM.
The answering machine is equipped with a detector which emits a warning sig-
nal when the battery is almost empty. In the latter case “Lo” appears on the dis-
play and you will have to replace the battery.