TP-Link TL-SL2218WEB - Manual (Page 15)

8
Web Smart Gigabit Switch Family User's Guide TL-SG2109WEB/TL-SL2210WEB/TL-SL2218WEB/TL-SL2428WEB/TL-SL2452WEB
2. Insert the switch into the rack.
3. Fix the switch to the rack with the rack screws (not provided).
3.1.3 AC Power
The switch can be used with AC power supply 100 to 240V AC,50 to 60Hz.
The switch’s power supply will adjust to the local power source automatically.
3.2 Switch Aspect Description
3.2.1 Front Panel
The front panel of TL-SL2210WEB is configured as follows:
1 3 5 7 2 4 6 8 GIGA SFP
10/100Mbps 10/100/1000Mbps 1000Mbps
1 2 3 4 5 6 7 8
TL-SL2210WEB
RESET
8+2G Web-Smart Switch
Power
100M
Link
Act
System 1000M
GIGA
Link/Act
Link/Act
R
Figure 3-2. TL-SL2210WEB Front Panel
8 10/100Mbps RJ-45 ports: designed to connect to the device with the
bandwidth of 10M or 100M.Each port has a corresponding Link/Act and
10/100Mbps LED.
1 10/100/1000Mbps RJ-45 ports: designed to connect to the device with
the bandwidth of 10M, 100M or 1000M. It has a corresponding Link/Act
and 10/100/1000Mbps LED.
1 SFP ports: designed to install SFP module. It has a corresponding
1000Mbps Link/Act LED.
Reset Button: Press this button for three seconds to the reset software
setting back to factory default setting.
LEDS 



