Chapter 4: function description, 1 system setting, 1 system information – TP-Link TL-SL2218WEB User Manual
Page 19: 2 file transfer, 3 reboot & reset
12
Web Smart Gigabit Switch Family User's Guide
TL-SG2109WEB/TL-SL2210WEB/TL-SL2218WEB/TL-SL2428WEB/TL-SL2452WEB
Chapter 4: Function Description
This section presents the network concepts referred in switch function
description.
4.1 System Setting
System setting contains the following topics: displaying and configuring the
switch information, upgrading firmware, backing up and loading configuration,
rebooting and soft-resetting, configuring username and password.
4.1.1 System Information
The system information contains hardware version, software version, system
description, system name, system location, contact information and run time.
4.1.2 File Transfer
TL-SG2109WEB/TL-SL2210WEB/TL-SL2218WEB/TL-SL2428WEB/TL-
SL2452WEB Web-Smart Switch Family is equipped with the function of
configuration backup, configuration loading and system upgrading.
The configuration file and executive file are transferred in TFTP protocol.
TFTP (Trivial File Transfer Protocol) is dedicated to transferring files between
two network stations. It’s based on UDP protocol.
4.1.3 Reboot & Reset
The “Reset” indicates “Soft-reset” here. Soft-resetting restores the switch
configuration to default except the switch IP address.