TP-Link TL-SL2218WEB - Manual (Page 51)

44
Web Smart Gigabit Switch Family User's Guide TL-SG2109WEB/TL-SL2210WEB/TL-SL2218WEB/TL-SL2428WEB/TL-SL2452WEB
If the static MAC address doesn’t be found in a searching, then the following
page will display:
Figure 5-29 A Failed Searching
Add: Input the MAC address in “MAC Address” field and select a port
number in “Corresponding Port” combo box, click the “Add” button, that
MAC address is added to the static MAC address table if the following
conditions are met:
1) That MAC address doesn’t exist in static MAC address;
2) That MAC address doesn’t exist in filtering MAC address;
3) There is enough space in static MAC address table (the capacity of the
static MAC address table is shown in “Appendix C”).
The static MAC address table is divided into several pages. At most 10 entries
can be held in one page. The buttons “First”, “Previous” and “Next” can be
used to browse the whole table.
Notice:
1) The capacity of the static MAC address is showed in “Appendix C”.
2) If an incorrect port number is selected when adding an entry, or the port
number is modified unexpectedly later, then the entries must be renewed;
otherwise, the packets cannot be forwarded correctly.
3) If a device, whose MAC address is added to static MAC address table, it
is connected to a wrong switch port (not the port configured in static MAC
