TRENDnet TW100-BRM504 - Manual (Page 25)

Advanced Features
45
Firewall Rules
The Firewall Rules screen allows you to define "Firewall Rules" which can allow or prevent
certain traffic. "Traffic" means incoming connection attempts, not packets.
By default:
• All Outgoing traffic is permitted.
• All Incoming traffic is denied.
Because of this default behavior, any Outgoing rules will generally Block traffic, and Incom-
ing rules will generally Allow traffic.
Firewall Rules Screen
An example screen is shown below.
Figure 35: Firewall Rules Screen
Data - Firewall Rules
Incoming Rules
# For the default rule, this will display "Default".
For rules which you create, this will display a radio button which
allows you to select the rule.
Enable Indicates whether or not the rule is currently enabled.
For rules you have added, this column will contain a checkbox,
allowing you to easily enable or disable the rule. (Click "Save" after
making any changes.)
Service Name The Service covered by this rule.
Action The action performed on connections which are covered by this rule.
LAN Server IP
Address The PC or Server on your LAN to which traffic covered by this rule
will be sent.
Broadband ADSL Router User Guide
46
WAN Users The WAN IP address or addresses covered by this rule.
Log Indicates whether or not connections covered by this rule should be
logged.
Buttons Use the Add button to create a new rule.
The other buttons - Edit, Move, or Delete - require that a rule be
selected first. Use the radio buttons in the left column to select the
desired rule.
Outgoing Rules
# For the default rule, this will display "Default".
For rules which you create, this will display a radio button which
allows you to select the rule.
Enable Indicates whether or not the rule is currently enabled.
For rules you have added, this column will contain a checkbox,
allowing you to easily enable or disable the rule. (Click "Save" after
making any changes.)
Service Name The Service covered by this rule.
Action The action performed on connections which are covered by this rule.
LAN Users The LAN PC or PCs covered by this rule.
WAN Servers The WAN IP address or addresses covered by this rule.
Log Indicates whether or not connections covered by this rule should be
logged.
Buttons Use the Add button to create a new rule.
The other buttons - Edit, Move, or Delete - require that a rule be
selected first. Use the radio buttons in the left column to select the
desired rule.