TRENDnet TW100-BRM504 - Manual (Page 42)

Modem Mode
79
Status Screen
In Modem mode, the Status screen looks like the example below.
Figure 57: Status Screen - Bridge Mode
Data - Status Screen (Bridge Mode)
System
Device Name The current name of the Router. This name is also the "hostname"
for users with an "@Home" type connection.
Firmware Version The version of the current firmware installed.
Modem
Modem Status This indicates the status of the ADSL modem component.
DownStream
Connection Speed Displays the speed for the DownStream Connection.
UpStream Connection
Speed If connected, displays the speed for the Up Stream (upload)
ADSL Connection.
VPI This displays the current VPI setting used for the ADSL connec-
tion.
VCI This displays the current VCI setting used for the ADSL connec-
tion.
LAN
IP Address The IP Address of the Broadband ADSL Router.
Network Mask The Network Mask (Subnet Mask) for the IP Address above.
MAC Address This shows the MAC Address for the Broadband ADSL Router,
as seen on the LAN interface.
Broadband ADSL Router User Guide
80
Buttons
Attached Devices Clicking this will generate a list of all devices currently using the
Access Point.
Refresh Screen Update the data displayed on screen.