Toshiba SD-P120DTKE - Manual (Page 31)

31
Preparations
Important
• Detach the battery pack from the player if not used for
prolonged periods.
■ Charging the battery pack
The battery pack needs to be charged before use.
(The battery indicator is shown in the upper left
corner of the screen when the power in the battery
pack is running low.) Perform a full charge before the
fi rst use.
1 Turn off the player.
The battery pack cannot be charged when the player
is on. Be sure to turn off the player before charging
the battery pack.
2 Attach the battery pack to the player.
3 Connect the supplied AC adapter and the power
cord only to the player.
Charging starts, and the BAT.CHARGE indicator illuminates
in orange.
When the charging is completed, the BAT.CHARGE
indicator turns off.
Charging time of a battery pack Approximately 4.5 hours
• This value is for reference only. Charging time may vary
depending on battery pack status and environment.
Continuous playback time while
using the battery pack Up to approximately 3
hours
• This value is for reference purpose only, it is not guaranteed.
(Conditions: 25°C, output from the headphones, DVD
playback, new battery pack in use.)
• Continuous playback time may vary depending on battery
pack status, operational status and environment conditions.
• Low temperature will shorten the playback time.
Notes
• Charge the battery pack with a surrounding temperature of
+10°C to +30°C (+50°F to +86°F).
• While the charge is in progress, do not disconnect the AC
adapter and the power cord until the BAT.CHARGE indicator
turns off.
• The attached battery pack may get warm when you are
charging it or operating the player. This is not a defect.