Toshiba SD-P120DTKE - Manual (Page 79)

79
Connections
Connecting to a device equipped with HDMI input
This player is compatible with 480i/480p/720p/1080i
signals.
1 Connect HDMI equipment to the HDMI
terminal of this player.
2 Press MODE repeatedly so that “
HDMI
”
appears on the LCD.
The LCD is ready to display pictures from the
equipment connected to the player.
Notes
• Refer to the owner’s manual of the connected equipment as
well.
• When you connect the player to other equipment, be sure to
turn off the power and unplug all of the equipment from the
wall outlet before making any connections.
• HDMI is an evolving technology, so it is possible that some
devices may not operate properly with this player.
• If you place the player near a tuner or radio, the radio
broadcast sound might be distorted. In this case, place the
player away from the tuner and radio.
• The output sound of the player has a wide dynamic range.
Be sure to adjust the receiver’s volume to a moderate
listening level. Otherwise, the speakers may be damaged by
a sudden high volume sound. HDMI OUTPUT
HDMI compatible device
HDMI cable
(not supplied)
HDMI, the HDMI logo and High-Defi nition Multimedia
Interface are trademarks or registered trademarks of HDMI
Licensing LLC.