Tekxon Technology X52 - Manual (Page 10)

8
4 Basic operation
4.1 Switching the camera on and off
Switching the camera on
Press the On/Off button for 1-2 seconds
to switch the camera on. If the camera
is not switched on, check the polarity of
the batteries and ensure that they are
charged.
Switching the camera off
Press and hold the main switch for
several seconds to switch
the cameral off. The LCD goes blank.
If the camera is idle for more than three minutes, it is switched off
automatically to save battery power. Press the On/Off button for 1-2 seconds
to switch the camera on again.
Automatic deactivation is not active in USB or record mode.
On/off button