Tekxon Technology X52 - Manual (Page 31)

29
6.2.2 Installing the driver in Web Cam mode
1.
Connect the camera to the computer. The system should automatically recognise that a
new device has been connected.
2.
In Web Cam mode, the driver must be installed for all systems. The procedure is similar
to that described for DSC mode.
3.
Under Windows 2000, you may be asked about the
digital signature of the driver. Click “Yes” to install
the driver.
4.
When installing the driver on Windows XP the
Found New Hardware Wizard appears. Select
“Install the software automatically” (recommended).
The following window may appear. Click “Continue”
and wait until the installation is complete.
5. The installation procedure under Windows ME and VIsta is similar.