Tekxon Technology X52 - Manual (Page 13)

11
4.3.2 Snapshot
Press the On/Off button to switch the camera on.
1 Select single
shot mode
When the camera is switched on, it is
automa-
tically in still photograph mode. If this is
not the case, press the
mode
button to select the photography mode.
Photo-
graphy mode is active when the
symbol appears in the upper corner of
the LCD display.
2 Zooming in or out digitally
Use the LCD to frame the image and press the
button to zoom in or the
button to zoom out.
3 LCD
You can now view the image on the
LCD. The meaning of the status
symbols shown on the LCD is
explained in the table on page 11.
4 Taking a photograph
Press the shutter release down fully to take a photgraph.
Photographs taken with the camera are saved as JPEG files.
Photo/Video/sound
recording/configuration mode