Trimble Outdoors 5700 - Manual (Page 31)

5700 GPS Receiver User Guide 1 5
Setting up the Receiver 2
Op
eration
2.3.3
General Guidelines
The following guidelines apply whenever you set up your receiver for
operation:
• When plugging in a Lemo cable, make sure that the red dots on
the receiver port and the cable connector line up. Never use
force to plug cables in, as this may damage the pins of the
connectors.
• When disconnecting a Lemo cable, pull the cable connector
straight out of the port. Do not turn it.
• To securely connect a TNC cable, push the connector into the
port and turn it. TNC cables and the corresponding TNC ports
on the 5700 receiver are color-coded to help you connect each
cable to the correct port.
• Insert the internal batteries (Part Number 38403) with the
terminals facing the CompactFlash/USB door. Only
new-generation Lithium ion batteries with a center groove can
be used.