Trimble Outdoors 5700 - Manual (Page 90)

6 Software Utilities
7 4 5700 GPS Receiver User Guide
Op
eration
6.4.3
Adding Frequencies for the Internal Radio
If your 5700 receiver has the optional internal radio installed, you can
use the WinFLASH software to add frequencies to the default list.
To add radio frequencies:
1. Start the WinFLASH software.
The Device Configuration screen appears.
2. From the Device type list select 5700 Receiver.
3. From the PC serial port field select the serial (COM) port on
the computer that the receiver is connected to.
4. Click Next .
The Operation Selection screen appears. The Operations list
shows all of the supported operations for the selected device. A
description of the selected operation is shown in the Description
field.
5. Select Configure Radio and click Next .