Introduction, Appl icatio ns – Trimble Outdoors 5700 User Manual
Page 96
7
Static and FastStatic Surveying
8 0
5700 GPS Receiver User Guide
Appl
icatio
ns
7.1
Introduction
Static and FastStatic are two types of postprocessed surveys. The 5700
receiver can be used in Static and FastStatic surveys, as well as RTK
and postprocessed kinematic surveys. The 5700 receiver can be paired
with any other Trimble survey-grade receivers for this purpose.
The following items are important conditions for this application:
•
To compute baselines, at least one other receiver must be
logging data simultaneously and at the same epoch rate.
•
For every baseline, all receivers on the baseline must be
tracking at least four satellites in common.
•
Each receiver must be a survey-grade receiver, capable of
logging both C/A code and at least L1 carrier phase
observables.
•
The 5700 receiver is a dual-frequency receiver—to achieve
dual-frequency baseline results, the receiver must be used with
another dual-frequency receiver.