TANDBERG 150 - Manual (Page 11)

1 TANDBERG 150
9
1.2 Unpacking and Mounting
Unpacking the system
The system lies fully assembled in the box. Remove the accessories box and carefully lift the
system out of the box. To protect the camera lens while installing, it is recommended to keep
the camera lens cap on. In the accessories box you find:

LAN cable

Power adapter and power cable
Handset
Handset is not included with the TANDBERG 150, but is an accessory device. Contact your
TANDERG representative for more information.
Mounting of the handset
Slide the handset bracket into the tracks at the underside of the system. Place the system in
an upright position and lay the handset in its place. The handset is held in place by magnets.
See chapter 1.3 Connecting Cables for how to connect the handset cable.