TANDBERG 150 - Manual (Page 12)

TANDBERG 150 User Manual
10
1.3 Connecting Cables
Connect the cables as shown on the figure:
1. Plug for handset (optional)
Handset is not included with the TANDBERG 150, but is an accessory device. Contact your
TANDERG representative for more information.
2. Plug for headset (optional)
The TANDBERG 150 has a 2.5mm 3-pole mini-jack connector at its right side marked with
a headset symbol. This allows the user to connect a standard telecommunications headset
to the system. Headsets with the microphone positioned in front of the user
’
s mouth,
connected to the earphone through a rod, tend to give more echo than earbud headsets
with the microphone attached to the cord. TANDBERG recommends the Plantronics MX100
headset (www.plantronics.com, products
→
mobile)
3. Power cable
4. LAN 1
5. LAN 2