Tandy ET-539 - Manual (Page 13)

13
CHANGING CHANNELS
Your ET-539’s Auto-Scan feature au-
tomatically selects the clearest chan-
nel when you pick up the phone. If you
experience interference during a call,
press
CH to switch to the next channel
(25 in all) until you receive the best re-
ception.
USING REDIAL
To quickly redial the last number di-
aled, simply lift the handset from the
base and press
TALK again so the
CHARGE/TALK indicator lights, then
press
REDIAL .
The redial memory holds up to 81 dig-
its in the tone mode or 80 digits in the
pulse mode. The redial memory also
holds pause entries (see “Entering a
Pause” under “Memory Dialing”).
Note: We recommend you not use RE-
DIAL to dial numbers that include a
tone ( * ) entry (see “Using Tone Servic-
es on a Pulse Line”).
USING FLASH
Use FLASH on the handset to perform
the switchhook operation for special
services, such as call waiting.
For example, if you have call waiting,
press
FLASH to take an incoming call
without disconnecting the current call.
Press
FLASH again to return to the first
call.
Notes:
• If you do not have special phone
services, pressing FLASH might
disconnect the current call.
• The redial memory does not store
a FLASH entry or any digits
entered after you press FLASH .
43-1039.fm Page 13 Tuesday, August 17, 1999 10:12 AM