Transition Networks P332MF - Manual (Page 23)

Issue 1 September 2005 23
Chapter 5: Prepare for Configuration
This chapter provides information on preparing the P330 for configuration, and discusses the
following topics:
● Establishing a Console Connection
● Assigning a P330 IP Stack Address
● Establishing a Telnet Connection
● Configuring the Switch
Establishing a Console Connection
This section describes the procedure for establishing switch access between a terminal and the
Avaya P330 switch over the serial port provided on the front panel of the P330 (RJ-45 connector
labeled “Console”). For information on the console port pin assignments, refer to the Avaya
P333T User Guide.
Note:
Note:
Figure 6 shows the front panel of the P333T. The location of the Console port is
the same on all P330 switches.
Figure 6: Avaya P330 Console Port
Figure notes:
1. Console port
1