Transition Networks P332MF - Manual (Page 6)

Before you Start
6 Quick Start for Hardware Installation: P332MF Stackable Switch
Preparing Installation Files
Ensure that you load the latest versions of the firmware file for the P330. You can download the
firmware file needed for your installation from the Avaya Support Web site, at
http://
support.avaya.com .
Preparing Needed Tools
Prepare the tools you need to mount the P330, according to the Table 1 :
Choosing the Installation Site
Ensure that the location where you install your P330 fulfills the following requirements:
● Cables are away from sources of electrical noise such as:
● radio transmitters
● broadcast amplifiers
● power lines
● fluorescent light fixtures
● Water or moisture cannot enter the chassis.
● Air can flow freely around all sides of the chassis.
● The vents on the sides of the chassis are not blocked.
Table 1: Mounting Tools
If you need to mount on... Prepare these tools
Rack Phillips head screwdriver