Transition Networks P332MF - Manual (Page 30)

Device Manager
30 Quick Start for Hardware Installation: P332MF Stackable Switch
Configuring the Device Manager
You can configure several Device Manager parameters using the CLI. These parameters
include the time-out and retries parameters, the location of the Web server that provides the
help files for the Device Manager, and the Java plug-in required for running the Device
Manager.
Device Manager Commands
The following Device Manager commands are available.
Running the Device Manager
Note:
Note:
You should assign an inband or out-of-band interface IP address to the switch
before beginning this procedure.
To run the Device Manager:
1. Open your browser.
2. Enter the URL of the switch in the format http://aaa.bbb.ccc.ddd where
aaa.bbb.ccc.ddd is the inband or outband interface IP address of the switch.
In order to... Use the following command...
Set the SNMP retries parameter set snmp retries
Set the SNMP time-out parameter set snmp time-out
Set the location of the Web server
with the help files and the Java
plug-in set web aux-files-url
Display the SNMP retries parameter show snmp retries
Display the SNMP time-out
parameter show snmp time-out
Display the URL of the Web server
with the help files and the Java
plug-in show web aux-files-url