Toshiba RD-X2U - Manual (Page 16)

16
Index to Parts and Controls (Continued)
Introduction
Display
1 Picture quality mode indicator (HDD) (page
128)
The current picture quality mode lights up.
The modes are: MN (Manual)/SP (Standard Play)/
LP (Long Play)
2 L-PCM indicator (Linear PCM) (page 128)
Illuminates when playing back contents recorded
on the HDD or DVD-RAM disc, and the selected
audio mode is linear PCM.
3 Audio format indicator (page 128)
The audio format (Dolby Digital 1,2) selected
illuminates when playing back the HDD or DVD-
RAM disc.
4 Remain icon (page 65)
Illuminates during remain mode.
5 Picture quality mode (DVD-RAM) (page 128)
The current picture quality mode is illuminated.
The modes are: MN (Manual)/SP (Standard Play)/
LP (Long Play)
6 Angle icon (page 53)
Illuminates when playing a scene recorded with
multi angles.
7 Multi display (page 74)
Title (chapter or track) number, message, channel,
output, or audio/bilingual sound mode appear.
8 Analog output level indicator
Displays the analog output level.
L+R: Stereo and bilingual (left (main) channel and
right (sub) channel)
L: Left (main) channel
R: Right (sub) channel
Off: Mono
Level indicator may not show exact sound level. It
only shows the average level.
9 Time indicator
Displays current time, playing time, remaining
time, starting time of recording and so on.
! DVD bit rate value indicator (page 128)
Displays the bit rate value during recording. During
playback, it shows the actual bit rate value.
L Pressing the DIMMER button on the remote control
changes the brightness of the display (normal/dimmed/
off).
1 5 6 7 3 4 2
9 8 10 11 12 17 16 15 14 13 18
*RD-X2.Ope(US)p010-017 9/3/02, 11:23 AM 16