Toshiba RD-X2U - Manual (Page 25)

25
Basic operations
Pla
ybac
k
Recor
ding
Dubbing
Editing
Function setup
Other
s
Intr
oduction
Entering characters
The cursor may be followed by unwanted characters.
You can erase them if necessary by either of the
following measures:
Erasing characters
• Erasing all the characters on the writing board
Select “Clear All” by pressing the / / / buttons,
then press the ENTER button.
Alternatively, open the lid of the remote control and
press the CLEAR button.
• Erasing one character before the cursor
Select “BkSp” by pressing the / / / buttons,
then press the ENTER button.
Alternatively, open the lid of the remote control and
press the DELETE button.
(1) Press the button to select an input mode.
(2) Press the / / / buttons to select a character,
then press the ENTER button.
The selected character is input on the cursor.
(3) Repeat steps 1 and 2 to enter characters.
(4) When finished, press
to save the characters.
The characters you entered appears.
Notes
• You can enter up to 64 characters.
• When unnecessary information appears, or when you want
to alter the input character, press the CLEAR button to
erase all, or press the DELETE button to erase an
unnecessary character.
*RD-X2.Ope(US)p018-026 9/3/02, 11:23 AM 25