TANDBERG D1320202 - Manual (Page 29)

TANDBERG GW Data port Command Interface User Guide
29
Example:
Xcommand OptionKeyAdd 115201P1-1-6A96DAA4
*r Result (status=OK): /
*r/end
OK
OptionKeyDelete Command used to delete option keys.
Parameters:
• Key(r): <S: 0, 90> option key
Example (Delete Option Key nr. 1):
xCommand OptionKeyDelete 1
*r Result (status=OK): /
*r/end
OK
ServiceEntryDelete Command used to delete services from the 3G Gateway.
Parameters:
• ServiceEntryNumber(r): <1..100>
Example (Delete Service nr. 10):
xCommand ServiceEntryDelete 10
*r Result (status=OK): /
*r/end
OK
ServiceEntrySwap Command used to swap service numbers.
Parameters:
• ServiceEntryNumber(r): <1..100>
• ServiceEntryNumber2(r): <1..100>
Example (Swap Service nr. 10 & 11):
xCommand ServiceEntrySwap ServiceEntryNumber: 10
ServiceEntryNumber2: 11
*r Result (status=OK): /
*r/end
OK
Help or ? Displays the help menu.
help
Xfeedback The special command xfeedback lets the user register user defined
XPath expressions (with possible exposure options) to monitor changes
in the data. Whenever there is a change in one or more elements
addressed by a registered XPath expression, the part of the element
structure containing these changes will be returned. The system
supports a total of 20 registered expressions, with a total of 15
expressions for one session.
xfeedback ?
usage: xfeedback register <XPathExpression>
or: xfeedback deregister <index>