TANDBERG D1320202 - Manual (Page 30)

TANDBERG GW Data port Command Interface User Guide
30
or: xfeedback list
-
(note: deregistration with index=0 will deregister all registered expressions)
Examples:
"xfeedback register status/call" - to monitor call changes
"xfeedback register status/call--" - to monitor only call state changes
"xfeedback register configuration" - to monitor all configuration changes
Xhistory The special command xhistory presents the status of the last 255 calls,
made to or from the3G Gateway, via a cyclic buffer mechanism.
NOTE! If the 3G Gateway is registered with a Video Portal, the call
history can only be shown on the respective Video Portal.
xhistory ?
usage: xhistory call [1 .. 255]
-
Examples:
xhistory call 1
*l Call 1 (type=Vtlph, protocol=H323, direction=Incoming):
LogTag: 1
GatewayCallLogTag: 0
RemoteNumber: "9047123456789"
Q931Rate: 64
DisconnectCauseValue: 16
Duration: 67
*l/end
OK