Texas Instruments TVP5146EVM - Manual (Page 24)

SLEU063
24 TVP5160EVM User’s Guide
8.5.2 Register Editing
The next section describes the four available modes of register editing: Register Map Editor,
Encoder Module Editor, Generic I2C Register Editor, and Property Sheets. Each of these
functions can be selected from the Edit menu.
8.5.2.1 Register Map Editor
The register map editor, as shown in Figure 13, allows the display and editing of the entire used
register space of the device within a simple scrolling text box. To open this, click on Edit
Register Map in the Edit menu and click on the device type to edit. If the intended device type is
not shown, then use the Windows menu to activate the existing window.
Figure 13. Register Map Editor