Texas Instruments TVP5146EVM - Manual (Page 30)

SLEU063
30 TVP5160EVM User’s Guide
8.5.3.2 Auto–Update from Device
Items 4 and 5 above are referred to as the Auto–Update feature. Auto–Update can be disabled
by setting its program option button to DISABLED. This button is located on the initial dialog box
(WinVCC4 Configuration).
With Auto–Update enabled (default), the user can open both the Property Sheets and the
Register Map Editor at the same time. Changes made to the Property Sheets (and applied) are
updated in the register map window as soon as the Register Map window is clicked on. It also
works the other way; changes made in the Register Map Editor are updated in the Property
Sheets as soon as the Property Sheets window is clicked on.
Figure 17. Property Sheets