Texas Instruments CC2533 - Manual (Page 10)

swru266
10/25
The latest version of RemoTI software can be downloaded from the Texas Instruments
website (http://www.ti.com/remoti), where you will also find a complete user manual.
4.6 Installing the target module Windows drivers
Before your PC can communicate with the target modules over USB, you will need to install
the driver files for the target module. Drivers for Windows are included with the installer
A brief set of installation instructions for Microsoft Windows XP will be given here, but
Windows 2000, Windows NT and Windows 98 are also supported.
After you have downloaded RemoTI software from the web, run the installer file and follow the
instructions.
Before connecting the target module to the USB port of the PC, plug the CC2533EM module
onto the target module. The PCB antenna is used by default, hence it is not required to
connect the external antenna. Figure 3 shows a complete assembled target module.
Figure 3: Assembled target module
You can now connect your target module to the computer with a mini-USB cable. A “Found
New Hardware” dialog box will prompt you to locate the missing driver.