Glossary – TRENDnet TEW-429UF User Manual

Page 35

Advertising
background image

29

Glossary

For unfamiliar terms used below, look for entries elsewhere in the glossary.

A

D

-H

OC

(IBSS)

Ad-hoc mode does not require an AP or a wired network. A network that transmits wireless
from computer to computer without the use of a base station (access point).

Two or more wireless stations communicate directly to each other. An ad-hoc network may
sometimes be referred to as an Independent Basic Service Set (IBSS).

C

HANNEL

A radio frequency used by a wireless device is called a channel.

E AP A

UTHENTICATION

EAP (Extensible Authentication Protocol) is an authentication protocol that runs on top of the
IEEE802.1X transport mechanism in order to support multiple types of user authentication. By
using EAP to interact with an EAP-compatible RADIUS server, an access point helps a wireless
station and a RADIUS server perform authentication.

E

NCRYPTION

The reversible transformation of data from the original to a difficult-to-interpret format. Encryption
is a mechanism for protecting confidentiality, integrity, and authenticity of data. It uses an
encryption algorithm and one or more encryption keys.

F

RAGMENTATION

T

HRESHOLD

This is the maximum data fragment size that can be sent before the packet is fragmented into
smaller packets.

IEEE 802.1X

The IEEE 802.1X standard outlines enhanced security methods for both the authentication of
wireless stations and encryption key management. Authentication can be done using an external
RADIUS server.

I

NFRASTRUCTURE

(BSS)

When a number of wireless stations are connected using a single AP, you have a Basic Service
Set (BSS).

R

OAMING

In an infrastructure network, wireless stations are able to switch from one BSS to another as they
move between the coverage areas. During this period, the wireless stations maintain
uninterrupted connection to the network. This is roaming. As the wireless station moves from
place to place, it is responsible for choosing the most appropriate AP depending on the signal
strength, network utilization among other factors.

Advertising