Working with profiles – TRENDnet TEW-429UF User Manual
Page 9
3
The Link Information pane provides information on your current connection. This same pane is
shows at the bottom of all screens so you are always aware of your connection status.
A profile is a record of the configuration you use to connect to a particular access point. Without
profiles, you would have to reconfigure the TEW-429UF each time you change access points.
Using the Profile screen you can configure the TEW-429UF to access your home network and your
office network. Each configuration is saved as a profile. Then when you go from the office to your
home you just select the appropriate profile.
C
REATING A
P
ROFILE
Refer to the following to add a profile
1. Click Profile.
W
HEN THE
TEW-429UF
IS NOT CONNECTED TO YOUR COMPUTER, MOST
SETTINGS IN THE
W
IRELESS
C
LIENT
U
TILITY ARE UNAVAILABLE.
S
ETTINGS OR
BUTTONS THAT ARE NOT AVAILABLE ARE GRAYED OUT.
Working with Profiles
NOTE
Y
OU CAN CHANGE PROFILES WITHOUT REBOOTING YOUR COMPUTER.
(P
ERHAPS
WHEN WALKING FROM ONE ACCESS POINT TO ANOTHER WITHIN YOUR OFFICE.)
I
F
YOU USE
W
INDOWS
C
ONTROL PANEL TO CONFIGURE YOUR CONNECTIONS, YOU
MUST REBOOT THE COMPUTER WHEN CHANGING ACCESS POINTS.
NOTE