TRENDnet TEW-429UF - Manual (Page 39)

Working over Windows 98 & 98SE
Working as an USB flash disk under Win 98/98SE
The following flash disk driver installation is required only for Windows 98 and 98 Second Edition
(98SE) operating systems. The TEW-429UF works as a true “plug-and-go” flash disk device upon
the rest of Windows operation systems, such as Windows ME, 2000 and XP. You just need to
simply plug-in the TEW-429UF to computer USB port then Windows will automatically detect the
TEW-429UF as a flash disk device.
(1) Place TEW-429UF driver/manual CD to the CD-ROM drive of your computer.
(2) Run “Setup.exe” file to copy the TEW-429UF USB flash disk driver for Windows 98/98SE to your
computer.
(3) Click "Finish" to complete the driver copy.
(4) Plug-in the TEW-429UF to a free USB port of your computer. Windows will
install USB flash disk driver automatically.
Now you can use TEW-429UF as a flash disk.
Working as an USB Wi-Fi adapter under Win 98/98SE
To use TEW-429UF as an USB Wi-Fi adapter, you have to enable flash disk function first (see the
above section), then install WLAN driver.
(1) Plug-in the TEW-429UF to a free USB port of your computer
(2) Use Windows Explorer to find out "TEW-429UF" flash disk drive, then double click.
(3) Run “Setup.exe” to install WLAN adapter driver.
(4) Follow the WLAN adapter installation procedure to complete WLAN driver installation. The
WLAN adapter driver installation procedure is identical to Windows XP.