Asus P4-P5N9300 - Manual (Page 71)

ASUS P2-P5N9300/P4-P5N9300 4-29
4.5 Power menu
The Power menu items allow you to change the settings for the Advanced
Configuration and Power Interface (ACPI) and the Advanced Power Management
(APM). Select an item then press <Enter> to display the configuration options.
4.5.1 ACPI Suspend Type [S1&S3]
Allows you to select the Advanced Configuration and Power Interface (ACPI) state
to be used for system suspend.
Configuration options: [S1 (POS)] [S3 (STR)] [S1&S3]
Select Menu
Item Specific Help
Select the ACPI state
used for System
Suspend.
Phoenix-AwardBIOS CMOS Setup Utility
Main Advanced Power Boot Tools Exit
F1:Help ↑↓ : Select Item -/+: Change Value F5: Setup Defaults
ESC: Exit →←: Select Menu Enter: Select SubMenu F10: Save and Exit
ACPI Suspend Type [S1&S3]
ACPI APIC support Enabled
APM Configuration
Hardware Monitor
4.5.2 ACPI APIC Support [Enabled]
Allows you to enable or disable the Advanced Configuration and Power Interface
(ACPI) support in the Application-Specific Integrated Circuit (ASIC). When this item
is set to [Enabled], the ACPI APIC table pointer is included in the RSDT pointer
list. Configuration options:[Enabled]