Asus P4-P5N9300 - Manual (Page 77)

ASUS P2-P5N9300/P4-P5N9300 4-35
OS Select For DRAM > 64MB [Non-OS2]
Set this item to [OS2] only when you are running on an OS/2 operating system
with an installed RAM of greater than 64 MB. Configuration options: [Non-OS2]
[OS2]
Full Screen LOGO [Enabled]
Allows you to enable or disable the full screen logo display feature.
Configuration options: [Disabled] [Enabled]
4.6.3 Security
Supervisor Password
User Password
These fields allow you to set passwords:
To set a password:
1. Select an item then press <Enter>.
2. From the password box, key in a password which consists of up to eight
alphanumeric characters, then press <Enter>.
3. Confirm your password when prompted, then press <Enter>. The password
field shows Set.
Select Menu
Item Specific Help
Supervisor password
controls full access,
<Enter> to change
password.
Phoenix-AwardBIOS CMOS Setup Utility
Main Extreme Tweaker Boot Tools Exit
Security
Supervisor Password Clear
User Password Clear
Password Check [Setup]
Set this item to [Enabled] if you want to use the ASUS MyLogo2™ feature.
Halt On [All Errors]
Allows you to set the error report type.
Configuration options: [All Errors] [No Errors]