Asus P4-P5N9300 - Manual (Page 76)

4-34 Chapter 4: BIOS setup
4.6.2 Boot Settings Configuration
Case Open Warning [Enabled]
Enables or disables the chassis open status feature. Setting to [Enabled] clears
the chassis open status. Configuration options: [Disabled] [Enabled]
Quick Boot [Enabled]
Allows you to enable or disable the system quick boot feature. When this item is
set to [Enabled], the system skips certain tests while booting.
Configuration options: [Disabled] [Enabled]
Bootup Num-Lock [On]
Allows you to select the power-on state for the NumLock.
Configuration options: [Off] [On]
Typematic Rate Setting [Disabled]
Allows you to set the keystroke rate. Enable this item to configure the Typematic
Rate (Chars/Sec) and the Typematic Delay (Msec).
Configuration options: [Disabled] [Enabled]
Select Menu
Item Specific Help
Press [Enter] to
enable or disable.
Phoenix-AwardBIOS CMOS Setup Utility
Main Extreme Tweaker Boot Tools Exit
F1:Help ↑↓ : Select Item -/+: Change Value F5: Setup Defaults
ESC: Exit →←: Select Menu Enter: Select SubMenu F10: Save and Exit
Boot Settings Configuration
Case Open Warning [Enabled]
Quick Boot [Enabled]
Bootup Num-Lock [On]
Typematic Rate Setting [Disabled]
x Typematic Rate (Chars/Sec) 6
x Typematic Delay (Msec) 250
OS Select For DRAM > 64MB [Non-OS2]
Full Screen LOGO [Enabled]
Halt On [All Errors]
The following two items Typematic Rate (Chars/Sec) and Typematic Delay
(Msec) become configurable when Typematic Rate Setting is enabled.
Typematic Rate (Chars/Sec) [6]
Allows you to select the rate at which a character repeats when you hold a key.
Configuration options: [6] [8] [10] [12] [15] [20] [24] [30]
Typematic Delay (Msec) [250]
Allows you to set the delay before keystrokes begin to repeat.
Configuration options: [250] [500] [750] [1000]