Tyco Electronics Tyco elo Touchsystems 19R - Manual (Page 15)

Elo TouchSystems 19R series User Guide 15
The OSD shall control the following audio and screen characteristics:
PARAMETER ADJUSTMENT
Auto Adjust Automatically adjusts the system clock to the input video signal.
Luminance
Brightness Adjusts the Brightness signal from 0 (minimum brightness) to 100
(maximum brightness). Default: 100 (maximum brightness)
Contrast Adjusts the contrast of the video signal from 0 (minimum) to 100
(maximum). Default: 50.
Image setting
H-position Moves the image horizontally in single-pixel increments on a scale from
0 to 100 using at least 100 discrete steps. Default: 50 (centered in the
panel).
V-position Moves the image vertically in single-pixel increments on a scale from 0
to 100 using at least 50 discrete steps. Default: 50 (centered in the
panel).
Clock Adjusts the ratio of dividing frequency of the dot clock on a scale from 0
to 100 using at least 100 discrete steps. Default:50
Phase Adjust the phase of the panel dot clock with respect to panel data
frequency from 0 to 100 using at least 25 discrete steps. Default:62
Color Adjusts color temperature. Color temperature options shall be 9300K,
7500K, 6500K, 5500K, and User Color.Default: User Preset
Audio
Mute Turn on or off the mute function. Default value: Not muted.
Volume Adjusts the level of the audio signals to the Audio Output and Phone
Output signals from 0 (minimum volume) to 100 (maximum volume) in
100 discrete steps. Default value: 50.
OSD
OSD V-Position Moves the OSD display vertically from the bottom edge to the top edge of
the panel from 0 to 100. Default: 50 (centered in the panel).
OSD H-Position Moves the OSD display horizontally from the left edge to the right edge of
the panel from 0 to 100. Default: 50 (centered in the panel).
OSD Timeout Adjusts the OSD timeout time. OSD setting changes made prior to the
OSD timeout are kept and used. At a minimum, the user shall be able to
select options between 5 to 60 seconds. Default: 15 seconds.
OSD Language Selects which language the OSD information is displayed in. Options
shall be: English, French, Italian, German, Spanish, Simplified Chinese,
Traditional Chinese and Japanese. Default: English.
Recall
Color Recall Selecting “Color Recall” shall restore all factory default settings for the
color temperature .
Recall Defaults Selecting “Recall Defaults” shall restore all factory default settings for
the OSD .