Initial connections – Tyco Electronics Tyco elo Touchsystems 19R User Manual
Page 9
Advertising
Elo TouchSystems 19R series User Guide 9
Initial Connections
Prior to turning on your Touchcomputer you must take the power adapter and appropri-
ate power cable from the accessories box. Plug the small round plug with four pins into
the 12Vdc power input on the Touchcomputer. Plug the power cable into the power
adapter and the other end into a suitable power outlet (mains). Make sure the audio
jumper cable and video jumper cable are in place as shown below.
Standard Unit:
Intel: Integrated Dual-core Intel® Atom™ 1.6 GHz processor & 533 MHz system bus
Advanced Unit:
Intel Core 2 Duo E5300 2.6 GHz, 800 MHz FSB, 2 MB L2 Cache
Advertising