Tyco Electronics Tyco elo Touchsystems 19R - Manual (Page 21)

Elo TouchSystems 19R series User Guide 21
Securing the Touchcomputer Base
Short Base Mounting
Dimensions are in millimeters.
Mounting To A Wall
1. Remove the four screws (C), two are under the base assembly, in order to separate the
stand from the computer.
2. Rotate the monitor 180° (so the monitor will not be upside down when mounted in the
position shown).
3. Reinstall the four screws (C).
4. Route the cables through the cutout (if applicable) and mount the monitor to the wall
using the templates provided.