Tyco 0-1591099-x - Manual (Page 12)

24 Port Stackable Managed Switch – User Guide Page 12
Menu Navigation
To navigate all these menus, use the following keys:
• Tab:
Move the cursor to next item or right arrow key
• Backspace:
Move the cursor to previous item or left arrow key
• Enter:
Select the item.
• Spacebar:
Toggle selected item to next value in sequence
• Esc:
Go back to the action list or the previous menu
Note: Most menus have an action line at the bottom of the screen. This provides basic
context instructions such as Edit, Apply and Quit
Main Menu Screen
After login the screen below is displayed. Use the <tab> or cursor keys to step through the
sub-menus. Select the required sub-menu using the <enter> key.
Figure 11. Main Menu Screen
The sub-menus are:
• Status and Counters: Displays Port Status, Port Counters and System Information
• Switch Configuration: This large menu enables the configuration of key functions
such as IP address, Ports, Trunking, Mirroring, VLANs, QoS, Security, Broadcast
filtering etc.
• Protocol Related Configuration: Enables the configuration of Spanning Tree,
SNMP, GVRP and LACP.
• System Reset Configuration: Restores factory default values, restarts the Switch
and TFTP functions such as update firmware, Restore/Backup configuration.
• Save Configuration: Saves the current configuration to the switches permanent
memory.
Product Number 0-1591099-x © Tyco Electronics 2005 Issue 1