Tyco 0-1591099-x - Manual (Page 37)

24 Port Stackable Managed Switch – User Guide Page 37
Having selected working ports from the LACP Configuration screen the above is displayed.
Select <edit> from the action line and enter the number of ports to be working port. Press
<esc> to return to the action line and <apply> to save the configuration.
State Activity
If a LACP trunk has been configured it is possible to set the port to the following modes:
•
Active (default) – The port automatically sends LACP packet to the neighbor device
to establish a trunk connection
•
Passive – The port waits for a LACP packet from the neighbor device before
establishing a LACP trunk connection.
NOTE: One or both ends of the trunk link must be set to ‘Active’ .
Figure 33. LACP State Activity Screen
After selecting this option from the LACP configuration the screen above will appear. Now
select <edit> from the action line. Use the <tab> key to highlight the port to be modified and
press the <spacebar> to toggle between Active and Passive modes. Having made the
selection press <esc> to return to the action line and <apply> to save the configuration.
Product Number 0-1591099-x © Tyco Electronics 2005 Issue 1