2 connecting to your television, Connecting to your television – Topfield TF 7000 HD PVRt User Manual
Page 18
12
Setup
2.4.2
Connecting to your television
Between all the following connectors of the digital receiver, we
recommend you to use the first connector to get best picture
quality. If your television does not have the matching connec-
tor then use the next connector in the following order for best
picture quality.
1. HDMI connector (HDMI)
2. Component connector (YPbPr)
3. RGB connector (RGB)
4. S-Video connector (S-VIDEO)
5. Composite connector (VIDEO)
You should configure audio and video settings after connect-
ing up the digital receiver. See §
for detailed description.
To use the HDMI connector
If you have a high definition television set,
you should use a HDMI cable for best re-
sults. Plug one end of the cable into the
HDMI
socket on the digital receiver, and the
other end into the matching socket on your
television. In this case, you do not have to
make audio connections because the HDMI
connector can output stereo audio or Dolby
digital audio.
To use the component video connector
You will need to obtain a component video
cable (RCA cable) to use the component
video connector. Plug one end of the ca-
bles into the Y (green), Pb (blue) and Pr (red)
sockets on the digital receiver, and the other
end into the matching sockets on your tele-
vision.