Topfield TF 7000 HD PVRt - Manual (Page 20)

14 Setup
NOTE
You cannot view high definition video with the composite
video connector.
To connect the audio connectors
You will need to obtain an audio cable (RCA
cable) to connect the audio connectors. Plug
one end of the cable into the AUDIO L
(white) and AUDIO R (red) sockets on the
digital receiver, and the other end into the
matching sockets on your television or au-
dio system.
To enjoy Dolby digital audio, your televi-
sion or audio system must be able to de-
code Dolby digital audio, and you will need
to obtain a S/PDIF cable.
If you want to
use the COAXIAL connector, prepare a coax-
ial S/PDIF cable (RCA cable); otherwise, to
use the OPTICAL connector, prepare an op-
tical S/PDIF cable. Plug one end of the ca-
ble into the S/PIDF socket on the digital re-
ceiver, and the other end into the matching
socket on your audio system.
2.4.3 Inserting batteries in the remote control
To insert the batteries, open the battery compartment by re-
moving the lid, and then insert the batteries observing the po-
larity, which is marked on the base of the battery compart-
ment.
If the digital receiver no longer reacts properly to remote con-
trol commands, the batteries may be flat. Be sure to remove
used batteries. The manufacturer accepts no liability for dam-
age resulting from leaking batteries.