Topfield TF 7000 HD PVRt - Manual (Page 24)

18 Preference Settings
NOTE
You can enjoy only standard definition video with the follow-
ing connectors:
• Composite video connector (VIDEO)
• S-Video connector (S-VIDEO)
3.1.3 Sound mode
Basically, there are two audio sources as you can find two au-
dio sockets on the back panel of the digital receiver. You can
enjoy only one source or both of them in either stereo or mono.
Set the Sound Mode option as you desire.
Apart from this setting, you can change the sound mode with
the
button. See § 5.2.4 for detailed description.
The digital receiver can output two types of digital audio sig-
nals via the S/PDIF connector. One is an encoded signal, and
the other is a decoded signal. If your digital audio appliance
does not have a Dolby Digital decoder, you have to set the
Dolby Digital
option to PCM. Otherwise, set it to Bitstream.
3.2 Local time setting
You should set your local time for timer events.
Select the System Setting >
Time Setting
menu. You should
see a screen like the left figure.
You can make the local time to
be automatically set by using
Greenwich Mean Time (GMT).
To use Greenwich mean time,
take the following steps: