Trust Computer Products 140BM - Manual (Page 5)

TRUST 140BM LCD WIRELESS OBSERVATION SYSTEM
3 Approval
0678
- This device meets the essential requirements and other relevant conditions of the
applicable European directives. The Declaration of Conformity (DoC) is available
at www.trust.com/13816/ce.
- The device has been approved in accordance with RF CE0678 .
- This wireless device works at a frequency of 2.434 ~ 2.473 GHz. It meets the
essential requirements and other relevant conditions of R&TTE Directive
1999/5/EC and can be used in the following countries.
AT/BE/DK/FI/FR/DE/GR/IE/IT/LU/NO/PT/ES/SE/CH/NL/UK/HU/CZ/SK/PL.
- The following limitations are applicable for certain countries.
France -> only channel 2 may be used if the device is used outdoors.
(All three channels may be used if the device is used indoors.)
- There may be restrictions for the use of this device outside of the EU. If this device
is used outside of the EU, check whether this device meets local regulations.
Frequencies: 2.434 ~ 2.473 GHz. Bandwidth: 20 MHz. Transmitting power: 10
mW.
4 Installation
4.1 Preparing for installation
The connections on the monitor are given in table 1 and figure 1.
Item Description
Comments
A 6 Volt power adapter for the
monitor.
B Monitor’s power adapter
connection.
The voltage is shown on the label on
the adapter.
C Extra:
Scart connection
D Monitor’s audio/video
connection
For viewing the camera image on a TV
or to record the camera image on a
VCR.
Table 1: Monitor connections
The connections and switches of the camera are given in table 2 and figure 2.
Item Description
Comments
E 9 Volt power adapter for the
camera.
F Camera’s power adapter
connection.
The voltage is shown on the label on
the adapter.
G On/Off/Night mode switch
H Channel selection switch
I Power indicator Is lit when the camera is turned on.
Table 2: Camera connections
The monitor settings and options are given in table 3 and figure 3.
2