Toshiba F15 - Manual (Page 116)

116 Learning the Basics
Powering down the computer
5.375 x 8.375 ver 2.3
To use any of these methods, you first need to enable them in
Toshiba’s Power Saver utility.
1 Open the Start menu, click Control Panel, then
Performance and Maintenance.
2 Click the Toshiba Power Saver icon.
3 Click the Setup Action tab.
4 Select Stand by for the options you want.
❖ When I press the power button
Set this option to Standby to put the computer into
Standby mode when you press the power button.
❖ When I close the lid
Set this option to Standby to put the computer into
Standby mode when you close the display panel.
5 Click Apply.
6 Click OK.
For more information about the Power Saver utility, see
“Power Saver” on page 243 .
Starting again from Standby mode
To restart the computer from Standby mode, press the power
button until the on/off light changes to green. The computer
returns to the screen you were previously using.
If you place the computer in Standby mode by closing the
display panel, you can start it again by opening the display
panel.
NOTE