Toshiba F15 - Manual (Page 75)

75 Getting Started
Connecting external display devices
5.375 x 8.375 ver 2.3
Sample back of system
Connecting the display device
If you are connecting a television or other video display
device to the computer’s Component Video Out port, first
refer to
“Selecting video cables” below for guidelines on
choosing a video cable, then refer to ’Connecting a standard
television, projector, or VCR/DVD player’ below.
If you are connecting an SVGA monitor, skip to “Connecting
an external monitor or projector” on page 78 .
Selecting video cables
To connect a device to the S-video port, you will need to
purchase an S-video cable. For the best video quality, always
use a properly shielded cable.
HINT: Toshiba recommends using a cable no longer than
20 feet (approximately 6 meters).
Using a poor-quality cable may result in a dull or fuzzy
picture, poor color, ghosting, video noise, or loss of video.
Composite In
Coaxial antenna In
(Monitor In) S-video In
Component Out