Toshiba F15 - Manual (Page 178)

178
Getting to Know the Windows ® XP Media Center Edition 2005
Media Center Setup
5.375 x 8.375 ver 2.3
Some stations may not come in clearly if the signal is not
strong enough. If you do not have a Set-top box, you may need
to purchase a signal amplifier which may help boost and
improve the cable signal. Contact your service provider for the
proper hardware recommendations.
There are two ways to connect your computer to a TV:
1 Turn off the computer.
2 If your TV accepts component video inputs:
❖ Connect the component video adapter cable (included
with your computer) to the TV’s component video input.
Connect the adapter cable to the D-connector on the back
of your computer.
If your TV accepts S-video inputs:
❖ Connect an S-video cable (not shipped with your
computer) from the TV’s S-video input connection to the
S-video Out connector on the back of your computer.
3 Connect an audio cable (not shipped with your computer
or system) from the TV’s audio connection to the
headphone jack on the right side of your computer.
4 Turn on the TV, then turn on the computer.
5 To send the display signal to the TV, press the “Instant
TV Out” button, which is the furthest right button of the
Media control buttons above the keyboard (or press
FN + F5 ), and then toggle to the TV icon.
This step must be taken before launching the Media Center or
the InterVideo WinDVD™ Player.
NOTE
NOTE