Topcom BUTLER 4800 - Manual (Page 11)

Topcom Butler 4800/Twin/Triple/Quattro 11
Topcom Butler 4800/Twin/Triple/Quattro
ENGLIS
H
When there is an incoming call, you can still answer the call by pressing the Line button .
During the call, the keypad functions as normal. When the call is ended, the keypad will be
locked again.
5.12 Setting the dialling mode
There are two types of dialling mode:
DTMF/Tone dialling (the most common) (default)
Pulse dialling (for older installations)
To change the mode of dialling:
Press and hold the flash R button to toggle between dialling modes:
Æ‘PULSE’ will appear
when set to pulse or ‘TONE’ when set to tone (DTMF) dialling Æ After 5 sec. the unit returns
to standby
5.13 Handset name
You can change the name that appears on the sceen (max. 12 characters) during idle stage:
Press Menu button
twice Æ The currect handset name is shown Æ Delete the character
by the Mute -key. Æ Use the keypad to enter the new name. Æ Press the Menu/OK button
to confirm.
5.14 Prefix
You can set a Prefix number which will always be dialed out automatically before you enter
the telephone number you want to dial. This number will always be dialed even when calling
from phonebook memory, redial, etc...
5.14.1 To Edit or Delete the prefix number:
Press Menu button
ÆUse the Right button to scroll to ‘PREFIX’ and press OK Æ
Delete the digits by the Mute -key. Æ Use the keypad to enter the new prefix. Æ Press the
Menu/OK button to confirm.
5.14.2 Temporaly dial out without prefix
Enter the telephone number and press the Line button until the handset
icon appears on
the display. The number will be dialled out without Prefix Æ Press the Line button when you
want to terminate the call.
You can change by accident the dial mode of the phone when pressing the
recall/Flash key ‘R’ for 5 sec in standby. The wrong dialling mode will
cause that the number isn’t dialled correctly or isn’t dialled at all.
When a prefix number is set, all numbers dialed out will be with this prefix!