Topcom BUTLER 4800 - Manual (Page 8)

8 Topcom Butler 4800/Twin/Triple/Quattro
Topcom Butler 4800Twin/Triple/Quattro
4 Battery low indication
When the battery is empty, the handset no longer carries out operations. When a battery is
completely empty and you have put the handset on the base unit for a short period of time,
the Battery symbol will appear to be fully charged but this is actually not the case. The battery
capacity will decrease rapidly. We advise you to put the handset on the base unit for 12 hrs
so that it can be recharged completely.
• Full battery
• Empty battery
When you are in the middle of a conversation and the battery is almost empty, the handset
will emit a warning signal. Place the handset on the base unit to charge.
5 Operation
5.1 Navigating the menu
The Butler 4800 has a menu system which is easy to use. Each menu leads to a list of
options. To enter the menu, press the Menu button
Æ Use the Right or Left key
to scroll to the menu option you want. Press OK to select further options or to confirm the
setting displayed. The arrows on the display and shows the possible scroll direction
in the menu. The go back in the menu press the Escape/INT key.
5.2 Setting the language
Press Menu button ÆUse the Right button to scroll to ‘Language’ and press OK
Æ Scroll to the language you want with the Right or Left key and select OK .
5.3 Outgoing calls
5.3.1 Making a phone call
Press the Line button . You will hear the dial tone.
Æ Enter the desired telephone number.
Æ Press the Line button when you want to terminate the call.
5.3.2 Call setup with dial preparation
Enter the desired telephone number. An incorrect number can be corrected by means of the
Mute button . When you haven’t pressed a button for 20 seconds, the number you’ve
already entered will disappear and the handset returns to standby mode.
ÆPress the Line
button . The number will be dialled automatically. Æ Press the Line button again when
you want to terminate the call.
5.3.3 Redialling the last number dialled
Press the Line key
Æ The Line/Charge indicator (LED) on the base unit will blink. Æ
You will hear the dial tone. Æ Press the Redial key . The number you last called is dialled
automatically.