Pcmcia subsystem, Power subsystem – Texas Instruments 51X User Manual

Page 45

Advertising
background image

4.2.6

PCMCIA Subsystem

The notebook is equipped with an on-board PCMCIA host adapter PCMCIA
Controller) and sockets to support Type I, Type II or Type III options. The
PCMCIA Controller has the following features:

Single-chip PCMCIA host adapters

Direct connection to ISA (PC AT) Bus

Direct connection to PCMCIA 2.0 Bus

PCMCIA 2.0- and JEIDA 4.1-compliant

82365SL-compatible register set, ExCA-compatible

Automatic Low-power Dynamic Mode for lowest power consumption

Programmable Suspend Mode

Five programmable memory windows per socket

Two I/O windows per socket

Programmable card access cycle timing

8- or 16-bit CPU interface

8- or 16-bit PCMCIA interface support

ATA disk interface support

Automatic flash memory timing support

Easy host interface using ISA I/O addresses 03E0h, 03E1h

Mixed-voltage (3.3V or 5V) operation

Dual-socket-interface, 208-pin QFP

4.2.7

Power Subsystem

The Power Subsystem consists of the following major parts:

Power Management (hardware and software components)

AC Adapter

Primary Battery Board

Primary Battery Pack

4-6 Theory of Operation

Advertising