Texas Instruments 51X - Manual (Page 48)

5
Troubleshooting Procedures
5.1 General
This section provides the following information:
•
Overview of the fault isolation process
•
Guidelines for isolating computer malfunctions to replaceable
subassemblies
•
Instructions for executing diagnostics and interpreting error messages
5.2 Overview of Fault Isolation Process
The fault isolation process (summarized in Figure 5-1) consists of the
following:
•
Quick Check of the following:
•
Notebook power system (including battery packs and AC Adapter
connections) - refer to Paragraph 5.4.
•
Switch settings (ensure Power switch is On, and press Standby
switch to ensure that Notebook is not in Standby mode; press Shift
to ensure the notebook is not in Auto-Suspend mode.
•
All external cabling (if any)
•
Check LCD Contrast adjustment (refer to Section 3)
•
Record and attempt to resolve any displayed error messages/LED
indications (refer to Paragraph 5.3 and Table 5-1)
•
Record and attempt to resolve any series of beeps emitted from the
notebook indicating test failure (refer to Table 5-2)
Troubleshooting 5-1